World of *Nix

You will get most the data from GP home page. But there should be one correction. You have to use the init strig as ” AT+CGDCONT = 1,”IP”,”gpinternet” ”
Now it will work without any problem.

Today me(lavluda) && salahuddin66 successfully configured GPRS/EDGE of Grameen Phone and Aktel in Linux.

to check your mobile as a modem
——————————-
#wvdialconf

Grameen Phone

here is a sample of my wvdial.conf (Grameen Phone EDGE/GPRS)
————————————————————
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,”IP”,”gpinternet”
Modem Type = Analog Modem
ISDN = 0
Phone = *99***1#
Modem = /dev/ttyUSB0
Username = xyz
Password = xyz
Baud = 115200
———————————————————–
change the modem speed/Baud and /dev/ttyUSB0 according to your mobile phone

Aktel

here is a sample of my wvdial.conf (Aktel GPRS)
————————————————————
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
Phone = *99***1#
Modem = /dev/ttyUSB0
Username = xyz
Password = xyz
Baud = 115200
———————————————————–
change the modem speed/Baud and /dev/ttyUSB0 according to your mobile phone

Start
To start type wvdial in shell