GPRS or EDGE setting for Aktel and GP

December 28th, 2007 Leave a comment Go to comments

**This is not official page of any service provider, so test everything in own risk.

For windows:

Grameen Phone:

You will get most the data from GP home page. But there should be one correction. You have to use the init strig as ” AT+CGDCONT = 1,”IP”,”gpinternet” ”
Now it will work without any problem.

Aktel:

Nothing need special, simple make a dailer with you gprs/edge modem, and give *99***1# as hunting number. username and pass anything.

Teletalk:

everything same as GP except the apn (“gpinternet”), but i cann’t remember it right now, can anybody help me ?

Warid:

Everything available on there site.

For linux:

First of all, install wvdial (u can also use other dailer app)

to check your mobile as a modem
——————————-
#wvdialconf

Grameen Phone

here is a sample of my wvdial.conf (Grameen Phone EDGE/GPRS)
————————————————————
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,”IP”,”gpinternet”
Modem Type = Analog Modem
ISDN = 0
Phone = *99***1#
Modem = /dev/ttyUSB0
Username = xyz
Password = xyz
Baud = 115200
———————————————————–
change the modem speed/Baud and /dev/ttyUSB0 according to your mobile phone

Aktel

here is a sample of my wvdial.conf (Aktel GPRS)
————————————————————
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
Phone = *99***1#
Modem = /dev/ttyUSB0
Username = xyz
Password = xyz
Baud = 115200
———————————————————–
change the modem speed/Baud and /dev/ttyUSB0 according to your mobile phone

Start
To start type wvdial in shell

  1. February 4th, 2007 at 12:14 | #1

    im using motorola E100 with aktel sim card….how can i activate EDGE/GPRS in my mobile set??…i dont know the process…

  2. February 4th, 2007 at 12:38 | #2

    U have to use this setting.
    apn: (no need apn)
    IP: 192.168.23.7
    Port:9028 or 9201
    Hope it will work.

  3. Nehal Hasnain Sarja
    February 16th, 2007 at 12:20 | #3

    Im using TELETALK as my PC modem.
    by using PC suite im using it.
    As i m a pre paid user, its very much costly to use pre paid GP or AKTEL or TELETALK as modem.

    But, recently teletalk has introduced a new service named UNLIMITED MONTHLY GPRS for 800 tk only.

    Im using this facility, so, feel very easy to use net now. its really economic than GP or AKTEL pre paid service.

    thanks.

    # sarja #

  4. Aiman
    February 28th, 2007 at 12:38 | #4

    im using sonby ericsson k800i with aktel sim, i was wondering how to activate gprs/internet in my mobile

  5. Shajahan
    March 13th, 2007 at 21:57 | #5

    Im using samsung sgh d500 with gp sim card.how can i set email account and profile. 1. Smtp server name? 2. Smtp port? 3. Pop3 server? 4. Pop3 port? 5. Impa4 server? 6. Impa4 port? 7.profile ndme ? 8.apn ? Login id ? 9. Dns1 ? 10. Dns2 ?

  6. Chandan
    April 5th, 2007 at 09:27 | #6

    AKTEL provides unlimited GPRS use@750 tk only.

    • dibbyo
      October 16th, 2009 at 12:16 | #7

      how ? i have a aktel modem but i cannot set this in my pc i need ip,dns,wns,apn & etc. please sole this for me

  7. Faisal
    April 12th, 2007 at 20:55 | #8

    i wish to know about wireless lan. i’ve wireless lan in laptop. and in N80 cell phone. i can communicate between them through data cable or blue tooth or infrared. But i want to communicate though wireless lan between them. Any body have any idea?

  8. April 17th, 2007 at 20:07 | #9

    I’ve a Siemens M55 set with GP-Easy-Gold sim. I’ve enabled GRPS/WAP in my handset. But for professional need I have to go to places without landphone (but in GPRS signal area). How can I activate the phone as a GPRS modem on any PC ? Please send me the details.

  9. April 18th, 2007 at 14:38 | #10

    im using akel sim,and my moile is motorola E1000
    i cant log in to msn messenger.i dont know how to setup internet connection for aktel

  10. tutul
    April 20th, 2007 at 20:37 | #11

    how to use unlimited gprs in teletalk? thanks in advance

  11. rEzA
    May 7th, 2007 at 19:59 | #12

    i’m also looking for how to use unlimited gprs in teletalk. called customers care .. funny thing happed.. 2 number never picked up.. one cell number was on, But the user at the other end keeps on cutting the line ????!!!!!!!!!!

  12. May 8th, 2007 at 22:49 | #13

    How to setup GP Internet service using Samsung D600 as modem?

  13. May 9th, 2007 at 22:36 | #14

    i think that GP EDGE service is better then all mobile phone and IPS. if u use Nokia n70 for GP internet u get 10-20KB(Kilo Byte)NOt 20 kilo Bit.i neet for 30MB file download from web site only 20 minit.So compare which one best…….Really

  14. Shsajib
    May 12th, 2007 at 01:11 | #15

    Is there any charge for upload and download of unlimited gprs (Gp,aktel or teletalk) user ???
    I’m useing gp edge p1.But i wanna use unlimited gprs.
    Can any one tell me which is da best for unlimited gprs ???

  15. ov
    May 12th, 2007 at 22:51 | #16

    i think GP EDEG is better then all others operator. i -am use Gp in my N95. and i get 17 to 20 in good location

  16. ov
    May 12th, 2007 at 22:56 | #17

    KB not Kb. i also think GP EDGE is better then some ISP

  17. Raquibul
    May 13th, 2007 at 19:03 | #18

    I’m usig nokia 6020 with data cable,and if i try this way it says time out,do i need any driver for it?If i need it where can i find it?

  18. May 13th, 2007 at 21:03 | #19

    hi raquibul,
    can you give me the output of “dmesg | grep tty”
    what is your last output (after dail)

  19. Anis
    May 16th, 2007 at 14:55 | #20

    I can’t seeting up my phone as a modem. I using GP Line and nokia 6020 model. I am not getting the isp no of GP, for getting the connection in my desktom computer with my mobile.

    Please anybody help me for this?

    I have the Windos xp operating system. Att: Mr Salauddin66.

  20. mithun
    May 23rd, 2007 at 16:06 | #21

    Let me knwo the UNLIMITED MONTHLY GPRS setup for Teletalk prepaid.

  21. akash
    November 5th, 2007 at 12:59 | #22

    Hi, i am akash. How can i set my gp internet on pc? ple tell detiles?

  22. Rabiul Hassan Khan
    November 21st, 2007 at 03:29 | #23

    Alhamdulillah. Thank you very much for the information. I can use my mobile’s internet on computer. My mobile is motorola l6. I connect it with computer on usb port. Then on terminal I give command:

    wvdialconf create

    After this completes the modem detection, I copy and save the following as /etc/wvdial.conf:

    ############Copy From Here to:
    [Dialer Defaults]
    Init1 = ATZ
    Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    Init3 = AT+CGDCONT = 1,”IP”,”gpinternet”
    Modem Type = Analog Modem
    ISDN = 0
    Phone = *99***1#
    Modem = /dev/ttyACM0
    Username = xyz
    Password = xyz
    Baud = 460800
    ######## Waiting for carrier and then connects telling –> Don’t know what to do! Starting pppd and hoping for the best. (This connects to grameen phone’s internet, let’s mention it too).

    I wish to disconnect by pressing Ctrl + C, perhaps twice.

    Thank you all again. May Allah give us peace.

  23. Rabiul
    November 22nd, 2007 at 03:24 | #24

    Sorry, an error occured in posting the above message. Here is again… copy and save the following as /etc/wvdial.conf:
    ############Copy From Here to:
    [Dialer Defaults]
    Init1 = ATZ
    Init2 = ATQ0 V1 E1 S0 =0 &C1 &D2 + FCLASS=0
    Init3 = AT+ CGDCONT = 1,”IP”,”gpinternet”
    Modem Type = Analog Modem
    ISDN = 0
    Phone = *99 ***1#
    Modem = /dev/ttyACM0
    Username = xyz
    Password = xyz
    Baud = 460800
    ######## to here.

    Now on terminal type:
    wvdial
    and it connects to internet.

  24. Rabiul
    November 22nd, 2007 at 03:40 | #25

    Now, there is a linux software ‘gprsec’ to connect mobile with pc. Has anyone tested that with bd operators?
    How about chinese clone/pda sets? I heard there is no java in these and no application can be installed. Is this true? If so then it is useless to buy.
    Take care. Khoda Hafez.

  25. VAskor
    November 28th, 2007 at 13:40 | #26

    I want to use gp internet. Can you tell me what is the speed of gp internet.

  26. Rabiul
    November 28th, 2007 at 20:37 | #27

    Assalamualaikum. The above wvdial command connects to mobile. But to browse the web I have to put dns numbers in /etc/resolv.conf file. My /etc/resolv.conf file is as bellow:

    ######

    nameserver 202.56.4.120
    nameserver 202.56.4.121

    ######

    I am using grameen phone’s internet. The dns numbers is shown on terminal after wvdial connects successfully. So it can be copied from there.

    VAskor, GP’s internet speed is something like the speed of any medium quality cybercafe. More or less 3 to 7 kbps. But the line always remains active.

    Thank you. Khoda Hafez.

  27. Al Amin
    December 10th, 2007 at 11:25 | #28

    I have setup a EDGE Modem with sim. After setup Driver. Connection setup completed. When I dail 1 minit after Connection has Disconnet. Plz Help me . I need to Full modem & Connection setup with Picture.
    Al Amin

  28. December 13th, 2007 at 20:15 | #29

    Dear Lavlu bhai
    I cell phone is Nokia 6300 and i want to use gp internet via Bluetuth. how can i setup this in my pc. can u halp me.
    Thanks
    jahan

  29. siraj
    December 18th, 2007 at 15:45 | #30

    How can i use modem and cell at a time by GP.When i use my cell as modem no incoming call come to my number.have their any way of using both at a time.i mean when anyone try 2 my number then call will come to that number.

  30. alamin
    December 19th, 2007 at 14:49 | #31

    How Can setup Wireless Lan.

  31. August 2nd, 2009 at 21:26 | #32

    @siraj
    if there is any bandwidth use, the sim will not able to recive call. you can do one simple thing, use divert on net sim with “divert when not available”, it works fine for me .

  32. eamin
    August 14th, 2009 at 22:43 | #33

    ami ki gp modeme aktel use korte parbo

  33. August 15th, 2009 at 22:54 | #34

    @eamin
    yea, why not ? just create a new connection or account using apn as blank (empty), that’s all

  34. Titu
    August 23rd, 2009 at 22:46 | #35

    I want to use internet on my PC.my modem is samsung E-250.what can i do now?tell me the system.

  35. Sajeeb Saha
    September 10th, 2009 at 00:08 | #36

    Hello everyone,

    Can anyone tell me the settings for using the Grammenphone EDGE modem in fedora 8 (I am trying to use the modem not any cellphone) with gp sim card.

    Thanks in advance….

    Sajeeb

    • September 10th, 2009 at 16:36 | #37

      after inserting the modem, please give me the output of “sudo dmesg” and copy and paste last 10-20 lines here. then may be i can help you.

  36. debashish
    September 12th, 2009 at 09:33 | #38

    hi everybody,

    i’m in the same vessel as Sajeeb Saha. But i’m using chinese EDGE modem AF-E67 in UBUNTU 9.04 with GP sim. here is my last 20 lines output using “sudo dmesg”:

    [ 115.649284] mtrr: no MTRR for e4000000,2000000 found
    [ 117.344154] mtrr: no MTRR for e4000000,2000000 found
    [ 117.445173] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
    [ 117.445207] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode
    [ 117.445236] pci 0000:01:00.0: putting AGP V2 device into 1x mode
    [ 205.024024] usb 1-1: new full speed USB device using uhci_hcd and address 3
    [ 205.224195] usb 1-1: configuration #1 chosen from 1 choice
    [ 242.496095] usbcore: deregistering interface driver ndiswrapper
    [ 242.557913] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
    [ 242.708031] usb 1-1: reset full speed USB device using uhci_hcd and address 3
    [ 242.877685] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:’ExAllocatePoolWithQuotaTag’
    [ 242.877715] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:’MmLockPagableSectionByHandle’
    [ 242.877732] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:’MmQuerySystemSize’
    [ 242.877876] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:’IoGetConfigurationInformation’
    [ 242.877948] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:’atol’
    [ 242.878025] ndiswrapper (import:242): unknown symbol: HAL.dll:’ExReleaseFastMutex’
    [ 242.878060] ndiswrapper (import:242): unknown symbol: HAL.dll:’ExAcquireFastMutex’
    [ 242.878124] ndiswrapper (load_sys_files:206): couldn’t prepare driver ‘oxser’
    [ 242.879677] ndiswrapper (load_wrap_driver:108): couldn’t load driver oxser; check system log for messages from ‘loadndisdriver’
    [ 242.879772] usbcore: registered new interface driver ndiswrapper

    if you need any info please tell me.
    regards

    Debashish

  37. debashish
    September 12th, 2009 at 23:41 | #39

    lavluda,
    please help me.

  38. Rafi
    September 30th, 2009 at 12:54 | #40

    assamualaikum,
    Is there any way that i can use my NOKIA 3110c phone as modem in Puppy Linux?? I’m using Banglalink Edge Unlimited…pLz heLp 🙁

  39. Tanjil Islam
    November 12th, 2009 at 11:17 | #41

    I can use GP modem in ubuntu os but i can’t use it in RHEL5 using wvdialconf. It doesn’t work. Please help me.

  40. A’zubeir
    November 23rd, 2009 at 09:58 | #42

    Hello all !
    I’m trying to configure wvdial.conf for connect to the internet using AKTel SIM and a GPRS Modem.
    In my wvdial.conf file, I wrote this code:
    ————————————-
    [Dialer Defaults]
    Init1 = ATZ
    Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    Modem Type = Analog Modem
    ISDN = 0
    Phone = *99***1#
    Modem = /dev/ttyUSB0
    Username = xyz
    Password = xyz
    Baud = 115200
    ————————————-
    But, whenever I want to run wvdial, it whows my those line:
    –> Initializing modem.
    –> Sending: ATZ
    ATZ
    OK
    –> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    ERROR
    –> Bad init string.

    If anyone detects the error in my wvdial file, please, correct it and give me the right one.
    Thank you all for your help.

    • November 25th, 2009 at 09:22 | #43

      first use wvdialconf to generate the configuration file. then edit that file and add the extra lines from your current configuration.

      please let me know if you need more details.

  41. Masud
    December 10th, 2009 at 14:18 | #44

    I want to install my EDGE MODEM which MODEL No is E67. But i’ve no it’s cd. Now what can i do?

  42. February 27th, 2010 at 11:11 | #45

    sent ota for gp

  43. March 25th, 2010 at 12:34 | #46

    For teletalk

    Service Type APN IP Port (optional)
    No Use No Pay wap 192.168.145.101 9201
    Monthly/Daily Unlimited gprsunl 192.168.145.101 9201

  44. rasel
    May 6th, 2010 at 17:08 | #47

    how can i get the configaration of e-mail for grameenphone in nokia 6300?

  45. May 9th, 2010 at 21:44 | #48

    vai how can I use net on blackberry 8800 from aktel sim?

  46. fahim
    May 30th, 2010 at 15:20 | #49

    how to enable gprs in Apple iphone 3gs? i am using a robi (aktel) sim.

    do i need to download any software.

    will be grateful if you could explain the steps.

    fahim

  47. July 14th, 2010 at 13:33 | #50

    HI,
    i have a usb internet modem ”ZTE MF100” (brand-‘O2’ hsdpa) .
    but im unable to set this application to use internet with any operator sim (gp-b’link-ttalk or other)
    note-one of my friend using internet with same modem like mine but i cant..
    please inform me about the setting….

  48. Virus
    July 31st, 2010 at 02:08 | #51

    I wanna active GP Internet On my BlackBerry 8900!! But can’t it…. 🙁 PLZ Plz give me hints about it….. Tnx a lot.

  49. Md.Mehedi Hasan
    August 16th, 2010 at 12:15 | #52

    I need GPRS EDGE modem pc configure.

  50. Bikrom
    August 27th, 2010 at 12:50 | #53

    How can activate internet on BlackBerry 8800?

  51. Bikrom
    August 27th, 2010 at 12:53 | #54

    How can i activate internet on BlackBerry 8800 by using GP sim?

  52. Habib
    September 14th, 2010 at 07:43 | #55

    Is it possible to settings GPRS, EDGE in iphone from Bangladesh?

  53. Borhan
    September 24th, 2010 at 00:17 | #56

    How can i activate internet on Vodafone 330fm by using GP sim? if yes than give me the process of it.

  54. Ahmad
    March 9th, 2011 at 02:03 | #57

    Hi
    I like to connect with EDGE Modem,what you suggest to set the modem.
    from IRAN

  55. Rubel Monoar
    July 28th, 2011 at 17:04 | #58

    Hi,
    I’m using Samsung GT M5650 with GP connection.
    would you please tell me, how can I configure my mail box in the messaging option of my handset ?

  56. 101
    August 27th, 2011 at 05:33 | #59

    i need to know how to use internet in my laptop through iphone 4. it’s urgent!!

  57. September 2nd, 2011 at 23:03 | #60

    Thanks for the article.

    I invite you and anyone reading this to join my forum:

    http://www.puppylinuxforum.org/

    I think you’ll find it a refreshing change of pace.

  58. September 7th, 2011 at 05:03 | #61

    Looking for application developer for SMS sending & Receiving by using Modem and interface them with my customer interface. Front end is done but i need some one to hlp me to program SMS part for AUTO FLEXILOAD application.

    Thanks.

  59. September 9th, 2011 at 23:05 | #62

    GrameenPhone Internet setting For iPhone 2G/3G/3Gs/4G:

    1) GoTo Settings > General > Network > Cellular Data Network.

    2) Under “Cellular data” in:
    APN: gpinternet
    Username: No need
    Password: No need

    3) Now restart your iPhone and enjoy

  60. jamal
    September 14th, 2011 at 07:32 | #63

    I want to know how to use another sim in robi modem

  61. jamal
    September 14th, 2011 at 07:33 | #64

    Plz help me anyone, how to use another sim in robi modem. I want to know details settings.

  62. jamal
    September 14th, 2011 at 07:35 | #65

    Plz help me anyone, how to use another sim in robi modem. I want to know details settings. Plz inform me 01913734834 or [email protected], i am very glad if any one help me

  63. Jakir
    November 1st, 2011 at 18:39 | #66

    Dear Lavlu bhai
    I cell phone is Nokia 6300 and i want to use gp internet via usb. how can i setup this in fedora linux-15 my pc. can u halp me. i also try following rule
    [Dialer Defaults]
    Init1 = ATZ
    Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    Init3 = AT+CGDCONT=1,”IP”,”gpinternet”
    Modem Type = usb Modem
    ISDN = 0
    Phone = *99***1#
    Modem = /dev/ttyUSB0
    Username = xxxxx
    Password = xxxxx
    Baud = 115200
    but it can not save wvdial.conf in fedora linux-15.
    Thanks
    jakir

  64. ATAUR RAHMAN
    November 14th, 2011 at 15:36 | #67

    iI WANT TO USE IN AKTEL INTERNET WITH MY PC . HOW CAN DO IT ?

  65. Riyaz
    December 26th, 2011 at 04:26 | #68

    i am using samsung e2652 with grameen sim card.how do i set up dial up connection in my pc

  66. January 10th, 2012 at 12:01 | #69

    Halo

  67. March 13th, 2012 at 23:06 | #70

    i am using city cell zoom ultra modem in Bangladesh, but i didn”t find any initialization code for connection. so i didn”t established my connection, pls help

    songram

  68. MASUD
    March 29th, 2012 at 17:25 | #71

    I AM USING VODAFONE D’C1810 MODIL,I CANNOT USE ROBI NET

  69. April 19th, 2012 at 08:47 | #72

    I enjoyed your insightful post. topnotch work. I hope you release more. I will continue watching

  70. August 13th, 2012 at 00:17 | #73

    My brother recommended I might like this website.
    He was entirely right. This post actually made my day.
    You cann’t imagine just how much time I had spent for this information! Thanks!

  71. guljerzihan
    August 15th, 2012 at 06:19 | #74

    hi all
    m using citycell zoom ultra modem . but now m going to use its ruim in android devices like desire hd(cdma/gsm) but i need da apn of citycell…………..m can i use and any1 can help me plsssss????

  72. sajib khan
    October 20th, 2012 at 15:43 | #75

    i want to use internet in my mobile by using grameen phone.but i dont know how to setting gprs in symphony ft40.plz help me………………….!

  73. mahbub
    August 26th, 2013 at 04:08 | #76

    hello, i would like to kno the pin code form grameen to use the sim card in a modem,

    the pin code is required to unlock the sim, its not pin1, pin2, puk1, puk2, but its grameen pin code to unlock all sim to any modem,

    its under the ndis option
    plz get me this pin if any1 knows bout it

    thnk you,
    mahbub

  1. September 18th, 2010 at 19:52 | #1

56 queries in 0.116 seconds